• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : BX
• - Belt width : 17 mm
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CTBX100, so the inside length is 100 inches. 

• SIT - WEDGE belts are manufactured in accordance with American standards RMA and MPTA. Available in two different ranges : 
• - MC range (Raw Edge and Moulded Cog) : up to 2995 mm length 
• - E range (Envelope) : over 2995 mm length. 
•  
• The product size 
• For example, CW3V1000
• - 3V = Section, with belt width 10 mm and high belt 8 mm 
• - 1000 = Effective length x 10 (inches)

• SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
•  
• Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
•  
• Here are the product dimension : 
• - Belt width : 13 mm 
• - High belt : 10 mm
• - Inside length : refer to the last number in every product names, for example : CLSPA1000, so the inside length is 1000 mm.

No description for this product yet.

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : S 14 M 
• Pitch :  14 mm
• Pitch diameter : 318.06 mm
• Outside diameter + flange : - 
• Teeth : 72
• Belt width : refer to the last number in every product name. (example : ST72-S14M115, so the belt width is 115mm) 
• Type of pulley : 11
• Material : Cast iron
• Flange : Without flanges 

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 90 mm
• Screws : 36
• Type of Screws : M22

• Locking assembly with single taper design. Provides good concentricity and self centering. 
• It is recommended for medium torques and is self-centring. 
• The flange design prevents axial movement during installation. 
•  
• For the dimension of the product, please download the catalog in the document section

• SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
•  
• SIT-LOCK 14 are manufactured in five different types :
• - 14-21 for mid torque transmission
• - 14-22 for high torque transmission
• - 14-81 for very high torque transmission
• - 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
• - 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin. 
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product : 
• Outside diameter : 210 mm
• Length : 102 mm 

• Type of belt : L
• Pitch : 9.525 mm
• Pitch diameter : 56.84 mm
• Outside diameter + flange: 62 mm
• Teeth : 19
• Type of bush : 1108; max bore : 28 mm
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flange