No description for this product yet.

• Precision joints series "ER" (sliding bushes) 
• - Type "ER" : max. speed 1.000 rpm.
• - Type "HR": max. speed 4.000 rpm
• - Max. angle 45°
•  
• Here are the dimension of product : 
• Outside diameter : 42 mm
• Inner diameter : 20 mm
• Length of half joint : 54 mm
• Full length : 108 mm 

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 120.52 mm
• Outside diameter + flange: 129 mm
• Teeth : 40
• Type of bush : 1610; max bore : 42 mm
• Belt width : 1.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 5050 (125.125)
• - Bore : we provide taper bushing with minimal bore 50 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC125125F100 (5050X100MM), so the max bore is 125 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC125125F100 (5050X100MM), so the width is 125 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC125125F100, so the bore size is 100.

• JUBOFLEX® couplings has exceptional elastic properties, in fact it allows for : 
•  
• - An excellent dampening effect of the load peaks;
• - High safety factor and a very high resistance to alternating deformation, thanks to pre-compression;
• possibility of bearing misaligment values rarely possible with other couplings. 
•  
• Here are the dimensions of product :
• Outside diameter : 232 mm 
• Width : 62 mm 

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 5050 (125.125)
• - Bore : we provide taper bushing with minimal bore 50 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC125125F100 (5050X100MM), so the max bore is 125 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC125125F100 (5050X100MM), so the width is 125 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC125125F100, so the bore size is 100.

PBT Pulleys - for mounting taper bushing SER-SIT

Material: cast iron DIN 1691 GG-20/GG25

Finishing: protective surface treatment.

V-groove pulleys suitable for use with the following belts:

-SPZ-Z-3V

-SPA-A

-SPB-B-5V

-SPC-C

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 119.91mm
• Outside diameter + flange: 129 mm
• Teeth : 30
• Type of bush : 1610; max bore : 42 mm
• Belt width : 1.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flanges

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 225 mm
• Max bore : 115 mm
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 225 mm
• Max bore : 125 mm
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

No description for this product yet.

No description for this product yet.

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 450 mm
• Outside Diameter : 459.6 mm
• Groove : 5

1. Taper Bush : 2012
2. Shaft Diameter Range : 15 - 50 mm
3. Pitch Diameter : 280 mm
4. Outside Diameter : 284 mm
5. Groove : 2

No description for this product yet.

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 180 mm
• Outside Diameter : 185.6 mm
• Groove : 3

No description for this product yet.

• Type of belt : H
• Pitch : 12700mm
• Pitch diameter : 127.99 mm
• Outside diameter + flange: 137 mm
• Teeth : 32
• Type of bush : 1610; max bore : 42 mm
• Belt width : 1.50 inch
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges