• Locking elements consist of one internal and one external tapered rings. They are designed to work in combination with a clamp flange which can be bolted on a hub or shaft depending on application need. 
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL2F10/13; so, the inner diameter is 10 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL2F10/13; so, the outside diameter is 13 mm. 
• Width : 8 mm

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 241.18 mm
• Outside diameter + flange: -
• Teeth : 60
• Belt width : 1.00 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 55.45 mm
• Outside diameter + flange: 62 mm
• Teeth : 18
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 5

• Inner Diameter : 48 mm
• Outside Diameter : 80 mm
• High : 33 mm
• Screws : 7
• Type of Screws : M8

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3039 (75.75)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7575F25 (3030X25MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example,BC7575F25 (3030X25MM), so the width is 75 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7575F25, so the bore size is 25.

No description for this product yet.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1210 :
• - Belt type : SPA
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT080SPA2 (1210); so, the pitch diameter is 80 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT080SPA2 (1210); so the outside diameter is 80 + 5.6 = 85.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT080SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 59.27 mm
• Outside diameter + flange: 67
• Teeth : 15
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

No description for this product yet.

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 224 mm
• Outside Diameter : 233.6 mm
• Groove : 5

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 245.6 mm
• Groove : 3

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 103.74 mm
• Outside diameter + flange: 108 mm 
• Teeth : 26
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

• ype of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 119.91 mm
• Outside diameter + flange: 129 mm 
• Teeth : 30
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 245.6 mm
• Groove : 6

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 87.57 mm
• Outside diameter +flange : 94 mm
• Teeth : 22
• Type of bush : 1610; max bore : 42 mm
• Belt width : 2.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 250 mm
• Outside Diameter : 259.6 mm
• Groove : 6

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 200.76 mm
• Outside diameter + flange: -
• Teeth : 50
• Belt width : 2.00 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges