• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1210 :
• - Belt type : SPA
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT080SPA2 (1210); so, the pitch diameter is 80 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT080SPA2 (1210); so the outside diameter is 80 + 5.6 = 85.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT080SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

No description for this product yet.

PBT Pulleys - for mounting taper bushing SER-SIT

Material: cast iron DIN 1691 GG-20/GG25

Finishing: protective surface treatment.

V-groove pulleys suitable for use with the following belts:

-SPZ-Z-3V

-SPA-A

-SPB-B-5V

-SPC-C

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

No description for this product yet.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1210 :
• - Belt type : SPB
• - Taperbush : 1210
• - Shaft diameter range : 15 - 50 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT090SPB1 (1210); so, the pitch diameter is 90 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT090SPB1 (1210); so the outside diameter is 90 + 7 = 97 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT090SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1210 :
• - Belt type : SPB
• - Taperbush : 1210
• - Shaft diameter range : 15 - 50 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT090SPB1 (1210); so, the pitch diameter is 90 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT090SPB1 (1210); so the outside diameter is 90 + 7 = 97 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT090SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1210 :
• - Belt type : SPB
• - Taperbush : 1210
• - Shaft diameter range : 15 - 50 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT090SPB1 (1210); so, the pitch diameter is 90 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT090SPB1 (1210); so the outside diameter is 90 + 7 = 97 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT090SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1210 :
• - Belt type : SPZ
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT075SPZ2 (1210); so, the pitch diameter is 75 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT075SPZ2 (1210); so the outside diameter is 75 + 4 = 79 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT075SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

PBT Pulleys - for mounting taper bushing SER-SIT

Material: cast iron DIN 1691 GG-20/GG25

Finishing: protective surface treatment.

V-groove pulleys suitable for use with the following belts:

-SPZ-Z-3V

-SPA-A

-SPB-B-5V

-SPC-C

No description for this product yet.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1210 :
• - Belt type : SPA
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT080SPA2 (1210); so, the pitch diameter is 80 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT080SPA2 (1210); so the outside diameter is 80 + 5.6 = 85.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT080SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

No description for this product yet.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

No description for this product yet.