No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 40 mm 
• Outside diameter of the hub : 24.5 mm 
• Total length : 64 mm 
• Length of sleeve : 37 mm 

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 77.11 mm
• Outside diameter + flange: -
• Teeth : 48
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : Without flanges

No description for this product yet.

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 93.65 mm
• Outside diameter + flange: 98 mm
• Teeth : 30
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1215 (30.40)
• - Bore : we provide taper bushing with minimal bore 11 mm and 1 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3040F11 (1215X11MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3040F11 (1215X11MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3040F11, so the bore size is 11.

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 170 mm
• Outside Diameter : 177 mm
• Groove : 2

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 75.02 mm
• Outside diameter + flange : 84 mm
• Teeth : 50
• Type of bush : 1615 
• Belt width : 50 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 35.62 mm
• Outside diameter + flange: 40
• Teeth : 12
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 144.16 mm
• Outside diameter + flange: 151 mm 
• Teeth : 36
• Belt width : 0.75 inch
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 67.35 mm
• Outside diameter + flange: 77 mm 
• Teeth : 17
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3020 (75.50)
• - Bore : we provide taper bushing with minimal bore 22 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7550F22 (3020X22MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC7550F22 (3020X22MM), so the width is 50 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7550F22, so the bore size is 22.

• Inner Diameter : 42 mm
• Outside Diameter : 75 mm
• High : 33 mm
• Screws : 7
• Type of Screws : M8

• Inner Diameter : 90 mm
• Outside Diameter : 130 mm
• High : 40 mm
• Screws : 9 
• Type of Screws : M10

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3535 (90.90)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC9090F25 (3535X25MM), so the width is 90 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC9090F25, so the bore size is 25.

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 140 mm
• Outside Diameter : 145.6 mm
• Groove : 2

No description for this product yet.